Skip to content
SearchSearch

DIY rosé gold jewellery

DIY rosé gold jewellery
15 minEasy

Gleaming rosé gold, silver, black or yellow gold – these are the latest must have colours for any kind of jewellery.
This year, too, rosé gold is the colour for jewellery. Wherever you look, you seem to see it. These pretty earrings and matching pendant are not only elegant and stylish, they‘re also very quick and easy to make from FIMO. Whether you make these pieces with or without texture, jewellery in a matching colour will jazz up your outfit in no time.

Step-by-step tutorial

FIMO effect - DIY rose gold jewellery

This jewellery looks good in any colour. We’ve chosen the FIMO effect colours metallic gold, pearl light silver, pearl black and pearl rosé gold, but of course you can use whatever colours you like.

First of all, knead 3 portions of FIMO effect in each of the colours metallic gold, pearl light silver, pearl black and pearl rosé gold until soft and roll out into a 1-2 mm sheet using the acrylic roller or clay machine (setting 4).

If you want to give your jewellery a leather look, this is very easy to create using a texture sheet. To do this, wipe the FIMO texture sheet “leather” with a baby wipe or spray it with a little water, this will make it easier to remove the sheet from the FIMO later. Now place the texture sheet on the FIMO and roll over with the acrylic roller in one direction, applying even pressure, in order to imprint the pattern firmly onto the FIMO.

Now cut out circles from the FIMO sheet using round cutters. We’ve chosen cutters with a diameter of 1.5 cm for the earrings and 2.5 cm for the pendant. Pierce a hole at the top of the pendant using the bead piercing needle. Remove the rest, place the circles on baking paper and harden in the oven for 30 minutes at 110°C / 230°F.

Tip: Place the FIMO sheets on baking paper and cut out the circles directly on the paper. Then you won‘t need to touch the circles and they won’t warp before you harden them.

Once they have cooled, stick the ear studs to the back of the circles with Pattex Super Glue and leave to dry. Push the split ring through the pendant and attach it to the chain. And your DIY jewellery is done! Have fun crafting your own!

Tip: Work in progress and left-over material should be protected against sun and heat and can be stored in a screw-top jar or in cling film to protect it from dust and dirt.

Material overview

What you need

ProductArticle no.Quantity
FIMO® effect 8020 Oven-bake modelling clay - Single product metallic gold 8020-11 1
FIMO® effect 8020 Oven-bake modelling clay - Single product pearl rosé 8020-207 1
FIMO® effect 8020 Oven-bake modelling clay - Single product pearl black 8020-907 1
FIMO® 8700 05 Acrylic roller - Blistercard containing an Acrylic roller 8700 05 1
FIMO® effect 8020 Oven-bake modelling clay - Single product pearl light silver 8020-817 1

Additionally required:

Smooth working surface (glass or ceramic), ear studs, chain and split ring in a colour to match the FIMO, 2 round cutters (diameter 1.5 cm and 2.5 cm), superglue, jewellery pliers

No time right now?

Save this article as PDF!

Article (PDF)

You might also be interested in: